MultiConnect Analogue-to-Wireless Converter

• 

MultiConnect AW

Analogue-to-Wireless Converter

The MultiConnect® AW analogue-to-wireless converter is a convenient turnkey solution that allows legacy equipment with built-in analog modems to connect to the cellular packet data or circuit switched data networks. By emulating the traditional dial-up PSTN network and using integrated or external cellular modems, the affordable MultiConnect AW converter gives new life to devices currently using traditional analog dial-up communications. The MultiConnect AW targets applications with analogue modems that need to utilize cellular networks for connectivity to their host application, such as automated teller machines (ATMs), remote monitoring systems, alarm systems, and credit card/POS terminals.

 

Key Benefits

• Extends the life of legacy dial-up devices by connecting them to cellular networks
• Analog-to-wireless migration
• Converts phone number to IP address

 

Features

• 3G and 2G models available
• Serial port configuration
• Supports packet data, circuit switched data and PPP pass-through modes
• V.34/33.6K analog modem and SLIC for PSTN emulation
• RJ-11 port provides dial tone, ring, busy and DTMF detection
• Supports analogue modem connections from 300 baud to 33.6K bps with error correction and data compression
• Two-year warranty

 

MT100A2W Model

• Metal chassis for industrial applications
• Outbound and inbound calling
• LEDs for visual monitoring of power, signal strength, RS-232, and phone line status

 

MT200A2W Models

• Plastic chassis for indoor environments
• Outbound calling only
• LEDs for visual monitoring of power, signal strength, and phone line status

 

Specifications

MT200A2W-G and MT100A2W-G

• Standard: GPRS; Class 10
• Band, Frequency: Quad-band GSM 850/900/1800/1900 MHz
• Packet Data: Up to 85.6K bps Coding Scheme CS1-4
• Circuit-Switched Data: Up to 14.4K bps, non-transparent
• Data Format: For serial interface - Asynchronous, 8-N-1, fixed 115Kbps
• Flow Control: Hardware flow control
• Antenna Connector: RF Antenna: 50 ohm SMA (female connector)
• SIM Connector: Standard 1.8 and 3V SIM receptacle
• Serial Command Port: Fixed @ 115200bps
• Analog Connection: Supports connection speeds up to 33600bps (V34)
• Command Connector: DE9 (female connector)
• Dial Connector: RJ11
• Antenna Connector: RF Antenna: SMA (female connector). Refer to Antenna Specifications.
• Power Connector: 2.5mm miniature screw-on
• Voltage Range: 9V to 32V @ 400mA
• Dimensions:
• MT200A2W-G: 12.06cm (W) x 4.01cm (H) x 7.34cm (D)
• MT100A2W: 17.78cm (W) x 3.15cm (H) x 7.07cm (D)
• Weight:
• MT200A2W-G: 0.147Kg
• MT100A2W: 0.320Kg
• Operating Temperature1: -40° C to +85° C UL listed @ +40° C
• Storage Temperature: -40° C to +85° C
• Humidity: Relative humidity 20% to 90% noncondensing

 

MT200A2W-H5

• Standard: High Speed Packet Access (HSPA+)
• Band, Frequency: Penta band 850/900/1700/1900/2100 MHz
• Data Speed:
• HSDPA data service of up to 7.2 Mbps
• HSUPA data service of up to 5.76 Mbps
• Data Format: For serial interface -- Asynchronous, 8-n-1, fixed 115Kbps
• Flow Control: Hardware flow control
• Antenna Connector: SMA (female connector).
• Serial Command Port: Fixed @ 115200bps
• Analog Connection: Supports connections speeds up to 33600bps (V34)
• Command Connector: DE9 (female connector)
• Dial Connector: RJ11
• Power Connector: 2.5mm miniature screw-on
• Voltage Range: 9V to 32V @400mA
• Dimensions: 12.06cm (W) x 4.01cm (H) x 7.34cm (D)
• Weight: 0.147Kg
• Operating Temperature: -40° C to +85° C UL listed at +40° C
• Storage Temperature: -40° to +85° C
• Humidity: 20% to 90% non-condensing